Search Results For:

screw element

41 Products Found

75mm High Torque Twin Screw Extruder Strand Pelletizing System For PET Recycling Processing

75mm Hight Torque Twin Screw Extruder with Strand Pelletizing system PET Reycling No. Denomination of the delivery Qty. 1.0 Raw materials dealing units 1.1 Auger loader for PET flakes 1set Motor power: 1.1kw Horizontal conveying motor: 0.75kw Volume of storage tank: 500L Capacity: 100-500kg/hr 1.2 Volumetric feeder 1set Motor power:1.5kw, Feeding mode: by twin screw, Center distance:64 Material contact parts are made of 304 stainless steel Volume:50L Capacity:200-600kg/hr

Easy Operation Twin Screw Compounding Extruder for PP PE PS PA PC ABS

CHT52--Eco Twin Screw Compounding Line for PP,PE,PS,PA,PC,ABS,etc. Technical specification No. Denomination of the delivery Qty. 1.0 Raw materials dealing units 1.1 High speed mixer 1set Total volume:200L Effective volume:175L Capacity:75kg/time Motor power: 37/45kw Heating power: 6kw Main shaft speed: 490/980rpm Unload way: pneumatic 1.2 Auger loader 1set Motor power: 1.1kw Agitating motor: 0.75kw Storage tank: 300L Made of stainless steel Capacity: 100-500kg/hr 1.3

High Speed Twin Screw Side Feeder Extruder lastic Filler and Glass Fiber Feeding

HSF Series High Speed Twin Screw Side Feeder for Plastic Filler and Glass Fiber Feeding Charateristic of high speed side feeder: Precise Modular Screw Design, you dont have to change the whole feeding screw, instead, just some of the screw elements. High Torque Gearbox. Accurate gears and shaft, imported bearings. High Speed Force Feeding, max speed could be up to 600rpm. High Efficient Capacity, intermesh screw, no back-flow problem Frequency Inverter Control, speed could

95mm High Torque Twin Screw Extruder Machine nder Water Pelletizing System for EVA TPU PVC

95mm Hight Torque Twin Screw Extruder with Under Water Pelletizing system TPV Technical specification No. Denomination of the delivery Qty. 1.0 Raw materials dealing units 1.1 Refilling system for PP granules 1set Vacuum pump: 2.2kw Stainless hopper Control mode: double time delay Control cabinet Capacity: 500-800kg/hr Volume of refilling silo: 800L Stainless steel made With bottom and top level sensor Pneumatic discharge valve 1.2 Loss-in-weight feeder for PP granules 1set

Long Fiber Glass Coating LFRT Twin Screw Extrusion Line with 500kg hr Capacity

LFT-D Long Fiber Glass CoatingTwin Screw Extrusion Line for 500kg/hr General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30 The excellent properties are as

800kg per Hour Plastic Extrusion Line Twin Screw with Under Water Pelletizing System

Plastic Devolotization Twin Screw Extrusion line with under water pelletizing system with output of 800kg/hr. Specifcation of the machine: 2.0 CHT75-Plus granulating unit 2.1 CHT75-Plus twin screw extruder Main motor: AC Motor, 200KW Parker inverter from USA Power transmission: Safety clutch protection unit from , with speed sensor to protect gearbox Gearbox: High safety factor design; Latest steel alloy material for gears applied with special heat treatment and manufactured

50kg hr Twin Screw Extrusion Line FT D Coating P and Glass Fiber

50kg/hr Twin Screw Extrusion Line for LFT-D Coating with PP+Glass Fiber General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30 The excellent properties are as

500kg per Hour PE Filler Single Screw Extruder with Water Ring Pelletizing System

500kg/hr single screw extruder with water ring pelletizing system for PE filler Company Advantages: 1. Quick response to your needs 2 Specific proposals based on your applications 3. Professional R&D,production,sales and service 4. Rich experience on the plastic compounding extrusion. 5. All machine swill be produced under our QC standard. Advantages of the high efficiency single screw extruder:; Comparing to normal single screw extruder, We have greatly improved the screw

Single Screw Extrusion Line ater Ring Pelletizing System for High Filler Material

Single Screw Extrusion Line with Water Ring Pelletizing System for High Filler at 400kg/hr Advantages of the high efficiency single screw extruder:; Refer to common single screw extruders, we have improved greatly the screw profile design and technology of the single screw extruder, making the output almost doubled than normal single screw extruder, while the energy consumption is 30% less. This not only improved the efficiency of single screw extruder itself, but also save

First 1 2 3 4 5 Last