Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
50kg/hr Twin Screw Extrusion Line for LFT-D Coating with PP + Glass Fiber
plastic extrusion line
,lft pellet production line
50kg/hr Twin Screw Extrusion Line for LFT-D Coating with PP+Glass Fiber
General Introduction of LFT
Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm.
The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30℃
The excellent properties are as following:
- Non-oriented gridding structure enables it can keep the original property even in high/low temperature and high frequency environment.
- Low shrinkage,low creep deformation, high dimension stability.
- Excellent anti-impact,high modulus,high strength, low bulkling and similar thermo expansion factor with metal.
- Excellent anti-chemical
- Highly anti-wear
- Excellent surface rating
- Excellent processing, highly flow-rate, easy demould,low damage to screw
We always focusing on new innovation on the LFRT/LFT-D. We have already done such turn-key project for some customers. The projects are LFRT compounding system, LFT-D,LFT-G and LFT-D-ILC.
Our Product Advantages:
1. Perfect fiber pre-treatment system
2. Perfect extrusion die head design to ensure the fiber can immerge into the melt and minimize the fiber floatation.
3.High quality twin screw extruders to make sure the stable extrusion
4. Professional team working with you together
5. Effective fast cooling system for the strands
6.Constant pulling machine
7. Good pelletizer to make sure the uniform granule size
8. Good controlling system for the whole line
9. Turkey projects are available here. One stop service for you.
Specifications:
| 1.0 | Raw material dealing system |
| 1.1 | GF unreeling system |
|
Platform for GF stacking 20 pcs of GF spin Outlets and GF leading rack with magnetic Size: 2500x1500x1500mm |
|
| 1.2 | GF pre-heating system |
|
Special harden alloy heating roller Surface fine polishing, angle could be adjusted manually Each heating roller has a separated controller Temperature controller is OMRON Heating power controlled by SSR K-type stainless steel thermocouple With operation indicator Size: 2000x1000x1500mm |
|
| 2.0 | Pelletizing system |
| 2.1 | Extrusion mold |
|
Number of holes: 18holes Cast-copper heater: 22kw, 4 temperature controller zones Max heating temperature: 300C The mold is well-sealed, no leakage, no transformation. Inlet: 18 holes Outlet: 18holes |
|
| 2.2 | Water bath with chiller |
|
Size: 500x5000mm Inner water bath: 450x2000mm Made of stainless steel, with leading rollers Movable support frame Chiller: Cooling capacity: 5000kacl/hr Compressor: 10HP Water pump: 2.2kw Temperature controlling range: 5-25C |
|
| 2.3 | Pulling machine |
|
Center height: 1000mm Max. pulling speed: 30m/min Motor power: 7.5kw Frequency inverter: Siemens |
|
| 2.4 | Pelletizer |
|
For granules size:¯3X12mm Max.pulling speed: 30m/min Motor power: 7.5kw, Frequency inverter: Siemens Operation box fixed on the pelletizer |
|
| 4.0 | Electrical controlling system |
| 4.1 | Cabinet |
|
Each parts has a separate small control cabinet Low voltage elements: Siemens Frequency inverter: Siemens Temperature controller : OMRON Indicator: Schcneider |
Pictures:
Easy Operation Twin Screw Compounding Extruder For PP PE PS PA PC ABS
Low Noise Twin Screw Compounding Extruder , PP / PE Plastic Extrusion Machine
Laboratory Twin Screw Extruder , Twin Screw Extrusion Line For TPU TPE TPR
