No. |
Denomination of the delivery |
Qty. |
1.0 |
Raw materials dealing units |
|
1.1 |
Automatic loader |
2sets |
|
Model: Screw loader
Agitator motor: 0.55KW;
Main motor: 1.1kw;
Tank Volume: 300L
Made of stainless steel
Diameter of screw: 90mm
Capacity: >500kg/hr
Hopper with sight-glass
Operation separately
|
|
1.2 |
Twin Screw volumetric feeder |
1set |
|
Motor power:1.5kw,
Parker inverter from USA
Max. rotation speed:140rpm
Material contact parts are made of 304 stainless steel
Volume:50L
Capacity: 400-800kg/hr
System connection: fast open connection
With stirrers both horizontally and vertically in case of bridging
|
|
1.3 |
Vertical force feeder |
1set |
|
Screw diameter:90mm
Max. rotation speed: 40rpm
Motor power:1.5kw
Parker inverter from USA
Stainless steel made
|
|
2.0 |
CHT65-Plus/CSE150 two stage extruder |
|
2.1 |
CHT95-Plus High Torque Twin Screw Extruder |
1set |
|
Drive: 132kw Siemens AC motor
Parker inverter from USA
Motor rotation speed:1480rpm
Power transmission:
Safety clutch torque limiter with speed sensor to protect the scerw and gearbox
Gearbox:
High safety factor design;
Latest steel alloy material for gears applied with special heat treatment and manufactured at high precision level;
NSK bearings and imported seals applied,
Special lubricating system equipped combined with immersing and forcing solutions;
Input/output rotary speed:1500/400rpm;
Torque:2x1575N.M
Oil pump motor power:1.1kw
Pipe type heat exchanger
Extrusion line:
Screw Diameter: 62.4mm,L/D:32:1;
Screw speed:0-400rpm;
Screw configuration:with modular structure, torque transmission by spline;
Screw material:Nitride steel to be anti-corrosion, Hardness HV50-1050
Barrel configuration: modular structure, each one with length of 4L/D,and the barrels connected together by bolts and pins;
Barrel material:Nitride Steel to be anti-corrosion, Hardness HV950-1050
Temperature controlling:
Heating system: Cast Aluminium heater, total heating power approx.30kw (No.1 Section cooled by water);
Cooling system: soft-water cooling system;
Temperature controller: OMRON dual channel PID from Japan
Soft-water cooling system including one 1.1kw water-pump, stainless steel water-box (with water Temp. gauge), heat exchanger, imported solenoid valves, water pressure indicator etc.
Steel base:
Welding base with special pads;
|
|
2.2 |
CSE150 single screw extruder |
1set |
|
Main motor:
55kw, Siemens AC motor
Frequency inverter :Parker from USA
Power transmission:
Standard transmission(with six nylon pins)
Gearbox:
With surface-hardened gearing system;
The gearbox with original lubricating system;
input/output rotary speed:1480/70rpm;
Extrusion line:
Screw Diameter: 150mm,L/D:9:1;
Screw speed:0—70rpm;
Screw material:38CrMoAlA with nitrifying heat-treatment; Nitride depth:0.5-0.7mm, Hardness HV 950-1050
Recommended barrels configuration:
No1 barrel with water cooling sheath;
Temperature controlling:
Heating system: electric heater, total heating power with approx.18kw (No.1 Section cooled by water);Three temperature controlling zones.
Soft-water cooling system: The same cooling system with CHT65-Plus;
Steel base:
Welding base with special pads;
|
|
2.3 |
Vacuum System |
1set |
|
Model: Water Ring Vacuum Pump
Material Baffle Plate:40Cr;Nitrided material
Limited pressure:25Pa
Vacuum Pump drive :3kw;
Max.Vacuum Degree:Max-0.08Mpa
Soft pipe connection
With Vacuum Gauge and dual Filtering Pot
Stainless steel vacuum chamber
|
|
2.4 |
Hydraulic screen changer |
1set |
|
Structure Mode: Plate type
Driving Mode:Hydraulic
Action Time: <1S;
Driving Mode: Hydraulic Station
The hydraulic station includes: Driving Oil Pump1.5kw,
Highest pressure:20Mpa, with safety valve, accumulator.
The inspection on pressure and temperature: Set one inspection position before the screen and display the melt temperature.
Accumulator volume:6.3L
Filtering area:6400 mm^2
|
|
3.0 |
Eccentric Die face air cooling pelletizing system |
|
3.1 |
Die face air cooling pelletizer |
1set |
|
Plate material:38CrMnAlA, nitrided steel
Hole diameter:3.2mm
No.of holes: 80holes
Heating method for flange: Cast-copper heaters with cooling fans
Cutter rotation speed:120-1500rpm
Cutter drive: 4kw,AC motor,
Frequency inverter: Parker inverter from USA
Cutter speed regulating: the speed can be controlled by manual or operating key of the controlling plate to meet the requirement of variable speed regulation. And the distance between the cutter and the plate can be tiny adjusted to avoid the change of the gap due to the inflation of the hot face plate, which results the damage to the cutter;
Pelletier covering: water jacket stainless steel
|
|
3.2 |
Cyclone separator |
2sets |
|
Air conveyor: 2x5.5kw
Diameter of the stainless steel pipe with water jacket cooling: 100mm
S.S. steel made;
|
|
3.3 |
Air Cooling Shifter |
1set |
|
Drive 2x0.37kw
Output :500-1500kg/hr
Discharging Gap: 3, qualified pellets,big pellets, small pellets
Made of stainless steel
Cooling fan: 3 pcs 0.37kw cooling fan
|
|
3.4 |
Air conveyor and silo |
1set |
|
Air blower: 4kw
Silo volume: 1000L
Stainless steel made
With disassembled support frame
Water jacket pipe line for cooling PVC granules
|
|
4.0 |
Control cabinet |
1set |
4.1 |
Cabinet for extrusion line |
1set |
|
All low-voltage electrics: EATON MULLER
Inverter for main motor: Parker from USA
Temperature controller: OMRON from Japan
Solid state relay: Crydom from USA
Interlocking and safety design:
- feeding interlocking with main extruder;
-single screw extruder interlocking with twin screw extruder;
-melt pressure over the setting value, both extruder will stop;
- overload protection for main motor and other motors;
CE certificate
|
|