Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Underwater Plastic Granulator Machine , Underwater Pelletizer Energy Saving
underwater granulator
,plastic pelletizing equipment
UW100 Series Under Water Pelletizing System for TPE with Ouput 1000kg/hr
General Instroduction:
We focus on the new technology innovation which helps our UW series to be high quality and more competitive compare to others.
The main charateristics of our UW series under water pelletizer are as following:
1. Super anti-wear hard alloy cutting blade with constant pneumatic cutting adjusting system to guarantee a longer life
2. Full automatic pneumatic kinfe feeding system to guarantee stable and continuous production, Cutting blade which contacts the die head can be adjusted automatically after abrasion, thus to guarantee the precised contact between cutter and die head, PLC controlling system to meet manual/automatic oerpation, touch screen makes the operation and maintenance easily
3. Modular Designed Tempered Water Circulating System to meet different requirement from customers. Every part can be installed independently which makes it easier and faster to replace
4. Based on requirements of customers as well as the charateristic of raw materials. COWIN EXTRUSION super anti-wear hard alloy die plate,cutting blades, high efficient and low energy consumption heading system make the cutting reulst more perfect.
Speicfications:
| 1 | Underwater granulation line UW-800 |
| 1.1 | Hydraulic screen changer |
|
Structure Mode: Double Cylinder Driving Mode:Hydraulic Action Time: <1S； Driving Mode: Hydraulic Station The hydraulic station includes: Driving Oil Pump1.5kw, Siemens motor Highest pressure20Mpa, with safety valve, accumulator. The inspection on pressure and temperature: Set one inspection position before the screen and display the melt temperature. Heating power:4kw, cast-Al heater Accumulator: 6.3L Filtering area: 6400 mm^2 |
|
| 1.2 |
Drive value 1. Main body made by nitriding steel and 38CrMoAlA, all nitrided. 2. Inside structure for discharging adopt 90 degree. 3. Drived by Pneumatic. 4. Controlled by solenoid directional valve |
| 1.3 |
Molding and die head 1. Mold made by High wear-resisting material (Wo graphene), guarantee more than 2 years; 500~800KG/H capacity, 45 holes 2. Die head heated by big power heating rod, heating power is 12 kw, heating temperature ranged from 100-300 С 3. Die head cover is made of stainless steel 4. Water room’s structure welded by stainless steel 5. Include connecting box for heating bar of die head |
| 1.4 |
Cutter device 1. Siemens Motor with power 7.5 kw. Maximum speed 3000 rpm and controlled by Siemens inverter; 2. Cutter knife is new type compensatory structure, 3. Cutter knife is welded by hard alloy, life is half year; 4. Knife frame is stainless steel, cutter knife structure is Straight knife type, knife frame connected by universal structure. 5. Cutter knife’s adjusting and feeding is pneumatic, easy to operate and efficient ; 6. Quick opening fix structure is used when connected to water chamber, O-type seal; 7. Drive bearing adopt SKF from Japan. Core parts are imported. Adopt linear guideway and shock isolator. |
| 1.5 |
Water cycle system 1. Centrifugal stainless steel water pump power is 5.5KW,Siemens motor 2. Stainless steel watr tank volume is 0.5m³,with heater,heating power is 18KW 3. Filter adopt quick open device to keep clean 4. Stainless steel heater exchanger 5. Temperature controlled by one area |
| 1.6 |
Centrifugal hydroextractor 1. Power is 11KW; 2. Equipped with stainless steel Cyclone separator; 3. Filter adopt quick open device to keep clean. |
| 1.7 |
Electric control system 1. All electric system are installed in an independent cabinet. 2. Inverter: Siemens 3. Whole driving system controlled by Siemens PLC 4. Driving system has manual and automatic selection mode. 5. Main electrical control elements are Siemens |
| 1.8 |
Hydraulic station 1. 1 piece solenoid valve 2. 10L accumulator 3. Power is 1.5KW |
| 1.9 |
Vibration screen 1. Length: 2,5 m 2. Drive motor: 0.4 kw 3. Material: stainless steel |
| 1.10 |
Melt pump 315CC 1. Melting pump size ZB-315CC 2. Rotating speed 0-60RPM(changable) 3. Normal displacement 150-700L/H 4. Pump material High temperature alloy steel 5. Driving power 18.5 kw, Siemens motor 6. Heating power 8 kw 7. Heating element Stainless steel heating rod 8. Power supply 380V, 50Hz 9. Wire connection Special junction box, closed wire connection 10. The fastening element(screw) 12.9 high-strength screw 11. Standard pump body Material is SKD11 |
Pictures:
Easy Operation Twin Screw Compounding Extruder For PP PE PS PA PC ABS
Low Noise Twin Screw Compounding Extruder , PP / PE Plastic Extrusion Machine
Laboratory Twin Screw Extruder , Twin Screw Extrusion Line For TPU TPE TPR
