Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Industrial Underwater Pelletizing System For TPE TPU TPV EVA 500kg/hr
underwater pelletizer
,underwater granulator
UW50 Series Under Water Pelletizing System for TPU
General Instroduction:
We focus on the new technology innovation which helps our UW series to be high quality and more competitive compare to others.
The main charateristics of our UW series under water pelletizer are as following:
1. Super anti-wear hard alloy cutting blade with constant pneumatic cutting adjusting system to guarantee a longer life
2. Full automatic pneumatic kinfe feeding system to guarantee stable and continuous production, Cutting blade which contacts the die head can be adjusted automatically after abrasion, thus to guarantee the precised contact between cutter and die head, PLC controlling system to meet manual/automatic oerpation, touch screen makes the operation and maintenance easily
3. Modular Designed Tempered Water Circulating System to meet different requirement from customers. Every part can be installed independently which makes it easier and faster to replace
4. Based on requirements of customers as well as the charateristic of raw materials. COWIN EXTRUSION super anti-wear hard alloy die plate,cutting blades, high efficient and low energy consumption heading system make the cutting reulst more perfect.
Speicfications:
| 1.0 | Melt pump | 1set |
|
Model: 200CC Big flange, big outlet designed. Installed under the reactor Capacity: 400-600kg/hr Drive motor: 15kw Parker inverter from USA Electric heating: 12kw Outlet pressure: 35Mpa Max working temperature: <350C Pressure sensors installed both at forth and back of pump With movable support frame for easy clean and maintenance |
||
| 2.0 | Under water pelletizing system | |
| 2.1 | Adaptor | 1set |
| Prepare by buyer | ||
| 2.2 | Diverter valve | 1set |
|
Diverter valve guides the melt stream either through the screen pack or via a bypass system around the screen pack to a strand die. The value avoids freezen-off of the die plate holes Hydraulic station offer the pressure |
||
| 2.3 | Under water pelletizer | 1set |
|
The main units include: - cutting chamber - die plate with 30 holes, and holes diameter 3.2 mm - clamping flange - sight glass - moveable support cart - pelletizer motor - hydraulic unit - cutter shaft - cutter hubs - heating bar 12 x 0.6 KW - special heat isolation Pelletizer motor is A.C. motor , 5.5KW, Max speed 3,000 rpm. The shaft is from NSK Japan The horizontal feed of cutter shaft and the cutter hub to the die plate is controlled by hand wheel accurately The tolerances between cutter hub and die plate are compensated automatically |
||
| 2.4 | Tempered water system | 1set |
|
he main unit includes: - stainless steel water tank, 1000L - heating system, 15 KW, 20-80 ℃ - water pump, 4KW - heat exchanger, size up to 1.5 m2 |
||
| 2.5 | By-pass pipes | 1set |
|
pipes is made of stainless steel -value of bypass and PLC program the time when the cooling water entry into the cutting chamber. -Sight glass for checking |
||
| 2.6 | Centrifugal dryer | 1set |
|
Motor power:15.5kw 304 stainless steel made With blower, filter, stainless steel barrate Volume: 500L Capacity: 500-800kg/hr |
||
| 3.0 | Control cabinet | 1set |
| 3.1 | Cabinet for under water system | 1set |
|
All electric system is installed in a separate cabinet Inverter for pelletizer: Parker from USA Inverter for melt pump: Parker from USA OMRON temperature control module from Japan Siemens 200CN PLC Siemens SMART touch screen Automatic control model |
Pictures:
Easy Operation Twin Screw Compounding Extruder For PP PE PS PA PC ABS
Low Noise Twin Screw Compounding Extruder , PP / PE Plastic Extrusion Machine
Laboratory Twin Screw Extruder , Twin Screw Extrusion Line For TPU TPE TPR
