Payment & Shipping Terms:
|Name::||Single Screw Extruder||Motor::||132kw AC|
|Capcity:||400-500kg/hr||Application:||EVA,PE,CaCo3,Talc, Silica,Carbon Black|
single screw extrusion machine,
single screw plastic extruder
Water Ring Pelletizing System for Single Screw Extruder with Output of 500kg/hr
Advantages of the high efficiency single screw extruder:;
Refer to common single screw extruders, we have improved greatly the screw profile design and technology of the single screw extruder, making the output almost doubled than normal single screw extruder, while the energy consumption is 30% less. This not only improved the efficiency of single screw extruder itself, but also save production cost for end-users.
Main Application :
|1..0||Raw material dealing system|
Hopper with magnet
100L stainless still hopper
With magnet throat
With sight glass on the hopper
|2.1||CSE130 single screw extruder|
Drive:132Kw, AC motor,Parker frequency inverter with global guarantee
Power transmission:nylon coupler
The gear box of the main extruder is combined with the torque distributing part and has a parallel three shafts design which are tightly in structure. The reducing, torque distributing and the two output shafts are all from NSK
The gear is high load hard gear face and gear shaft is made of 20CrMnTi,surface is nitrified processed,HRC56～60.
The safety cover needed for the gear shaft.
Airproof ring is imported
Screw:made of 38CrMoAlA,nitrified process,depth0.5-0.7mm hardness HV 950-1100,
Barrel: 38CrMoAlA, Nitrified process, depth 0.5-0.7mm,Hardness HV1000-1050
Venting ports will be on the middle and end of the barrel
The barrel is cooled by air blower. 0.55kw
Motor drive: 5.5kw
Vacuum degree: Max -0.08Mpa
With vacuum pot, vacuum gauge, and all related equipments.
|2.3||Hydraulic screen changer|
Structure Mode: Plate type
Action Time: <1S；
Driving Mode: Hydraulic Station
The hydraulic station includes: Driving Oil Pump1.5kw,
Highest pressure20Mpa, with safety valve, accumulator.
The inspection on pressure and temperature: Set one inspection position before the screen and display the melt temperature.
Heating power:4kw, cast-Al heater
Filtering area:8300 mm^2
|3.0||Water ring Cutting system|
Extrusion plate: made of 40Cr.
No.of holes: 50holes,
Diameter of hole: 3.2mm
|3.2||Water ring cutter|
Motor power: 4kw
With water ring cover and pipelines
Stainless steel made
|3.3||Water circulation system|
With heating exchanger, pipe type
Volume of water tank: 500L
With filter screen for big size
Made of stainless steel
With big drum filter.
Discharging Gap: 3, qualified pellets, huge pellets, small pellets
Made of stainless steel
|3.6||Air blower and silo|
Pipe collected with clamps for easy disconnected
Silo volume: 1000L
Made of stainless steel with support frame
Low-voltage electrics: EATON MULLER from Germany；
Speed regulator: Parker from USA；
Temperature control panel: OMRON from Japan
With safety switch on the cabinet
Contact Person: sales