Payment & Shipping Terms:
|Name::||CSE120 Single Screw Extruder||Motor::||132kw AC|
single screw extruder machine,
single screw plastic extruder
800kg/hr single screw extruder with strand pelletizing system for PE flakes recycling
1. Quick response to your requirement
2 Different combinations according to your application.
3. Professional R&D,production,sales and service
4. Rich experience on the twin screw extruder. Will help you to do the project perfectly
5. All machine will be produced under our QC standard.
Advantages of the high efficiency single screw extruder:;
Comparing to normal single screw extruder, We have greatly improved the screw design and know-how of the single screw extruder, making the capacity almost double then normal single screw extruder, while the energy consumption is much less. This not only increases the efficiency of extruder itself, but also save production cost for end-users.
Modular Single Screw Design
To solve the problem of some abrasive material processed by single screw, We have originally innovated modular single screw extruder. The whole screw is composed by small pieces of different screw elements like twin screw extruders. With this new design, customer doesn’t have to change the whole screw if it is worn by aggressive materials, instead, you just need to change some pieces of the screw elements where is seriously worn. This will save your cost too much.
The other advantage of this modular screw design is, since the screw is modular like twin screw, then we can install different pieces with different functions. This will help you to get a better plasticization and dispersed products.
Main Application :
Specification of the extruder:
|1..0||Raw material dealing system|
Hopper with magnet
100L stainless still hopper
With magnet throat
With sight glass on the hopper
|2.1||CSETM 120 single screw extruder||1|
Motor power:132Kw,SIEMENS BEIDE AC motor,SCHNEIDER frequency inverter with global guarantee
Power transmission:nylon coupler
The gear box of the main extruder is combined with the torque distributing part and has a parallel three shafts design which are tightly in structure. The reducing, torque distributing and the two output shafts are all from NSK
The gear is high load hard gear face and gear shaft is made of 20CrMnTi,surface is nitrified processed,HRC56～60.
The safety cover needed for the gear shaft.
Airproof ring is imported
Screw:made of 38CrMoAlA,nitrified process,depth0.5-0.7mm hardness 950-1100HV,brittleness I grade
Barrel: 38CrMoAlA, Nitrified process, depth 0.5-0.7mm,HV1000-1050
Venting ports will be on the middle and end of the barrel
The barrel is cooled by air blower. 0.55kw
Motor power: 4kw
Vacuum degree: 0.08Mpa
With vacuum pot, vacuum gauge, and all related equipments.
|2.3||Hydraulic screen changer||1|
Structure Mode: Plate type
Action Time: <1S；
Driving Mode: Hydraulic Station
The hydraulic station includes: Driving Oil Pump1.5kw,
Highest pressure20Mpa, with safety valve, accumulator.
The inspection on pressure and temperature: Set one inspection position before the screen and display the melt temperature.
Heating power:4kw, cast-Al heater
Filtering area:6400 mm^2
|3.0||Water ring pelletizing system|
Extrusion plate: 40Cr.
No.of holes: 40holes, 35holes
Size of hole: 2.8mm and 3.2mm
|3.2||Water ring pelletizer||1|
Using pure water
Driving power: 4kw
With water ring cover and pipelines
Stainless steel made
|3.3||Water circulating system||1|
With heating exchanger, pipe type
Volume of water chamber: 800L
With filter screen for big size
304 stainless steel made
With blower, filter, stainless steel barrate
Motor Power: 2x0.37kw
Discharging Gap: 3, qualified pellets, huge pellets, small pellets
Made of stainless steel
|3.6||Air blower and silo||1|
Blower motor power:4kw；
Pipe collected with clamps for easy disconnected
Made of stainless steel with support frame
Low-voltage electrics: SCHNEIDER；
Speed regulator: SCHNEIDER inverter；
Temperature control panel: RKC from Japan
With safety switch on the cabinet
Model of Single Screw Extruder:
Introduce products and applications detain
Recommend suitable solution
Provide with reference in formation
Offer lab for test
Provide with layout and engineering conditions
Inform the project processing status
Offer other documents
Provide with installation ,commissioning and training
Register and record customer information
Offer spare parts
Provide with necessary technical support for new application
Visit customer regularly and correct information
Contact Person: sales