Search Results For:

twin screw extruder elements

39 Products Found

45mm Single Screw Plastic Extrusion Machine For PP PE Film Recycling High Output

45mm single screw extruder with strand pelletizing system for plastic extrusion Advantages of the high efficiency single screw extruder:; Compare to traditional single screw extruder, COWIN has greatly improved the design and know-how of the single screw extruder, making the capacity almost double while the energy cost is half. This not only increases the efficiency of extruder itself, but also save production cost for end-user. Advantages: Same size extruder, bigger output

High Output Dual Screw Plastic Extrusion Line with Under Water Pelletizing System

Supper High Torque Twin Screw Extruder with Under Water Pelletizing System Main Introduction: Supper High torque twin screw extruder line is our improved product which can compare with European machine. The gearbox, torque limiter is imported directly from European suppliers. Motor, electrical parts will use Siemens or ABB. Barrel with bi-metallic linear inside, made by high accuracy CNC machine Screw elements is W6Mo5Cr4V2. Made by CNC machine. Screw and barrel can be

Long Fiber Glass Coating LFRT Twin Screw Extrusion Line High Production Capacity

LFT-D Long Fiber Glass CoatingTwin Screw Extrusion Line for 500kg/hr General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30 The excellent properties are as

Easy Operation Twin Screw Compounding Extruder For PP PE PS PA PC ABS

CHT52--Eco Twin Screw Compounding Line for PP,PE,PS,PA,PC,ABS,etc. Technical specification No. Denomination of the delivery Qty. 1.0 Raw materials dealing units 1.1 High speed mixer 1set Total volume:200L Effective volume:175L Capacity:75kg/time Motor power: 37/45kw Heating power: 6kw Main shaft speed: 490/980rpm Unload way: pneumatic 1.2 Auger loader 1set Motor power: 1.1kw Agitating motor: 0.75kw Storage tank: 300L Made of stainless steel Capacity: 100-500kg/hr 1.3

High Torque Twin Screw Plastic Extrusion Equipment , Masterbatch Production Line

65mm High Torque Twin Screw extruder for masterbatch production line 1.0 Raw materials dealing units 1.1 Volumetric feeder Motor power:1.1kw, ABB inverter Feeding mode:by twin screw, Center distance:46 Material contact parts are made of 304 stainless steel Volume:50L, Capacity: 200-500kg/hr 1.2 Side feeder Metering motor: 1.1kw ABB inverter By twin screw Force feeding motor: 3kw, ABB inverter By twin screw: Modular screw elements Feeding barrel: L/D 6 Bi-metallic linear

Dual Screw LFRT Extrusion Machine High Strength CE ISO9001 Approved

LFT-D Extrusion line for PA,PP, glass fiber and Glass Fiber with output 400kg/hr General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30 The excellent properties are

800kg/hr Plastic Extrusion Line Twin Screw With Under Water Pelletizing System

Plastic Devolotization Twin Screw Extrusion line with under water pelletizing system with output of 800kg/hr. Specifcation of the machine: 2.0 CHT75-Plus granulating unit 2.1 CHT75-Plus twin screw extruder Main motor: AC Motor, 200KW Parker inverter from USA Power transmission: Safety clutch protection unit from , with speed sensor to protect gearbox Gearbox: High safety factor design; Latest steel alloy material for gears applied with special heat treatment and manufactured

50kg/hr Twin Screw Extrusion Line for LFT-D Coating with PP + Glass Fiber

50kg/hr Twin Screw Extrusion Line for LFT-D Coating with PP+Glass Fiber General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30 The excellent properties are as

High Speed Side Feeder Extruder for CaCo3 Talc TiO2 Silca Carbon Black.

HSF 40 High Speed Twin Screw Side Feeder for CaCo3,Talc,TiO2,Silca,Carbon Black. Charateristic of high speed side feeder: Precise Modular Screw Design, you dont have to change the whole feeding screw, instead, just some of the screw elements. High Torque Gearbox. Accurate gears and shaft, imported bearings. High Speed Force Feeding, max speed could be up to 600rpm. High Efficient Capacity, intermesh screw, no back-flow problem Frequency Inverter Control, speed could be

First 1 2 3 4 5 Last