side feeder twin screw extruder

LFT-D Long Fiber Glass CoatingTwin Screw Extrusion Line for 500kg/hr General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30 The excellent properties are as

CHT52--Eco Twin Screw Compounding Line for PP,PE,PS,PA,PC,ABS,etc. Technical specification No. Denomination of the delivery Qty. 1.0 Raw materials dealing units 1.1 High speed mixer 1set Total volume:200L Effective volume:175L Capacity:75kg/time Motor power: 37/45kw Heating power: 6kw Main shaft speed: 490/980rpm Unload way: pneumatic 1.2 Auger loader 1set Motor power: 1.1kw Agitating motor: 0.75kw Storage tank: 300L Made of stainless steel Capacity: 100-500kg/hr 1.3

65mm High Torque Twin Screw extruder for masterbatch production line 1.0 Raw materials dealing units 1.1 Volumetric feeder Motor power:1.1kw, ABB inverter Feeding mode:by twin screw, Center distance:46 Material contact parts are made of 304 stainless steel Volume:50L, Capacity: 200-500kg/hr 1.2 Side feeder Metering motor: 1.1kw ABB inverter By twin screw Force feeding motor: 3kw, ABB inverter By twin screw: Modular screw elements Feeding barrel: L/D 6 Bi-metallic linear

Plastic Devolotization Twin Screw Extrusion line with under water pelletizing system with output of 800kg/hr. Specifcation of the machine: 2.0 CHT75-Plus granulating unit 2.1 CHT75-Plus twin screw extruder Main motor: AC Motor, 200KW Parker inverter from USA Power transmission: Safety clutch protection unit from , with speed sensor to protect gearbox Gearbox: High safety factor design; Latest steel alloy material for gears applied with special heat treatment and manufactured

LFT-D Extrusion line for PA,PP, glass fiber and Glass Fiber with output 400kg/hr General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30 The excellent properties are

CHT65-MAX Supper High Torque Twin Screw Extruder with Strand Pelletizing System for Filler Masterbatch Main Introduction: CHT65-Max is our supper high torque twin screw extruder. This is designed according to customer's requirement for high torque, cheaper price compare to European machines. The operation of this machine is fantastic according to customer. The granules quality is 100% same as European machine. Customer is very satisified. Specifcation of the machine: 1. Motor