 |
Beijing Silk Road Enterprise Management Services Co.,LTD
Beijing Silk Road Enterprise Management Services Co.,LTD |
Product Details:
Payment & Shipping Terms:
|
| MODEL: | Single Screw Extruder | Application: | Plastic Recycling |
|---|---|---|---|
| High Light: | single screw extruder machine,single screw plastic extruder |
||
120 mm single screw extruder with water ring pelletizing system
Main Specification:
2 Final product
HDPE granules
3. Output and main extruder type
output:400~600kg/hr (difference up to thickness);
main extruder type:CSETM120 venting single screw extruder
Flow chart description
Feeding system－>single screw extruding－>Water ring pelletizer－>Vibrator －>air blower and silo
4.Composition for whole line
Material dealing and metering system;
CSETM120 extrusion system;
Pelletizing and post-dealing system;
Description of the machine:
| No. | Description | Quty |
| 1..0 | Raw material dealing system | |
| 1.2 |
Hopper with magnet |
1 |
|
100L stainless still hopper With magnet throat With sight glass on the hopper |
||
| 2.0 | Extrusion units | |
| 2.1 | CSETM 120 single screw extruder | 1 |
|
Screw diameter:φ120mm L/D:32:1 Rotation speed:0～120rpm Motor power:132Kw,SIEMENS BEIDE AC motor,SCHNEIDER frequency inverter with global guarantee Power transmission:nylon coupler
Gearbox: The gear box of the main extruder is combined with the torque distributing part and has a parallel three shafts design which are tightly in structure. The reducing, torque distributing and the two output shafts are all from NSK The gear is high load hard gear face and gear shaft is made of 20CrMnTi,surface is nitrified processed,HRC56～60. Output/input ratio:1500/120rpm The safety cover needed for the gear shaft. Airproof ring is imported
Screw:made of 38CrMoAlA,nitrified process,depth0.5-0.7mm hardness 950-1100HV,brittleness I grade Barrel: 38CrMoAlA, Nitrified process, depth 0.5-0.7mm,HV1000-1050 Venting ports will be on the middle and end of the barrel The barrel is cooled by air blower. 0.55kw |
||
| 2.2 | Vacuum pump | 1 |
|
Motor power: 4kw Vacuum degree: 0.08Mpa With vacuum pot, vacuum gauge, and all related equipments. |
||
| 2.3 | Hydraulic screen changer | 1 |
|
Structure Mode: Plate type Driving Mode:Hydraulic Action Time: <1S； Driving Mode: Hydraulic Station The hydraulic station includes: Driving Oil Pump1.5kw, Highest pressure20Mpa, with safety valve, accumulator. The inspection on pressure and temperature: Set one inspection position before the screen and display the melt temperature. Heating power:4kw, cast-Al heater Accumulator6.3L Filtering area:6400 mm^2 |
||
| 3.0 | Water ring pelletizing system | |
| 3.1 | Extrusion die | 1 |
|
Extrusion plate: 40Cr. No.of holes: 40holes, 35holes Size of hole: 2.8mm and 3.2mm |
||
| 3.2 | Water ring pelletizer | 1 |
|
Using pure water Driving power: 4kw Capacity: 500-800kg/hr； With water ring cover and pipelines Stainless steel made |
||
| 3.3 | Water circulating system | 1 |
|
Motor: 5.5kw With heating exchanger, pipe type Volume of water chamber: 800L With filter screen for big size |
||
| 3.4 | Centrifugal dryer | 1 |
|
Motor power:5.5kw 304 stainless steel made With blower, filter, stainless steel barrate Volume: 800L Capacity: 400-800kg/hr |
||
| 3.5 |
Vibrator
|
1 |
|
Motor Power: 2x0.37kw Capacity:400-800kg/hr Discharging Gap: 3, qualified pellets, huge pellets, small pellets Made of stainless steel |
||
| 3.6 | Air blower and silo | 1 |
|
Blower motor power:4kw； Pipe collected with clamps for easy disconnected Silo: 1000L Made of stainless steel with support frame |
||
| 4.0 | Electric cabinet | 1 |
|
Low-voltage electrics: SCHNEIDER； Speed regulator: SCHNEIDER inverter； Temperature control panel: RKC from Japan Switches: Schneider With safety switch on the cabinet |
Pictures:
Contact Person: sales
